?
For those who have just bought a Canon DSLR camera, then it?s probably you?re more serious regarding your digital photography than most other people. To get the most out of your camera, it?s very useful to know and understand the basic physics behind it, what impacts specific settings of the camera have and so on. Photography is really a rewarding hobby and profession, but it?s hard to master, and just with lots of practice and no how would you get anyplace by using it. So, the very first thing you should have bought together with your Canon DSLR is definitely an SD card, a skylight filter for the lens (for defense), and a spare?Canon Lp-e6? battery.
On the other hand, there are 3 very important ideas that you must realize, and these are typical to each digital camera. These principles are essential to enabling light into your camera for capture of your shot, and utilized incorrectly will lead to some really wild final results. Hence, even for a novice, I recommend ignoring all automatic and aid settings on your camera, and jumping at the deep end and setting it to M, for manual. It really is involved at first, however in the long run become familiar with and understand how your camera performs much faster.
The 3 elements affecting light to your camera are:
1. ISO
In old film cameras, this handled the rate from the film. For bright sunny days, you would want to use 100 ISO film. For inside photography, you would have to have 400 ISO. It is related in a digital camera, however it now determines the sensitivity to light of the sensor (which has replaced the film).
In fundamental terms, if you?re shooting outdoors on the vibrant day, you should set your ISO to 100. If shooting inside, once more a higher ISO is required, however this can go nicely beyond 400 ISO, most cameras permit as much as 1600 ISO, but some newer ones go beyond even this. This eliminates the requirement for flash in lots of situations, and even though the results can be grainier, today?s technology is even eliminating this.
two. Aperture
The aperture is essentially your window into your camera. It?s a hole that may be enhanced or decreased based on what conditions you?re shooting in and the amount of light. It controls the amount of light entering the camera.
Basically, if you?re shooting a landscape, you may need a little hole (high f stop number), because there will be a lot of light. If shooting a portrait, then a large hole (tiny f cease number) is needed. Aperture also controls depth of area.
3. Shutter Speed
The 3rd and final method to handle light entering your camera is thru the shutter. This is the period of time the shutter is open.
In standard terms, if you want to freeze action crisply and cleanly, then use a very fast shutter speed. If you wish to show motion and blur, then a slower shutter speed should be applied (using a tripod).
The 3 affect each other, and for a properly exposed photo, should you adjust a single, you have to change the other. Practise and being attentive to your settings will help you understand this improved.
But when you visit practice, always remember to take a spare Canon Lp-e6 battery along with you.
Source: http://travelandleisure.tk/2013/02/10/the-3-elements-of-light-inside-a-camera/
joe pa joe paterno dead marist south carolina primary results betty white ed reed football schedule
কোন মন্তব্য নেই:
একটি মন্তব্য পোস্ট করুন